The Tecline Side 16 Avenger is a sidemount wing with 16 kg of lift and an integrated DIR harness. It is a reworked version of the Side 16: a system that stays simple, adjusts quickly and is used in training as well as in caves and on technical dives. Harness and wing work as one unit, so getting in and out of your rig is easy.
What sets the Avenger apart?
The bladder has a low profile to cut drag and reduce the risk of snagging in tight restrictions. The top section is slightly cut away so the wing does not stick out above your silhouette, and for the same reason there is no trim pocket up there. An extra dump valve sits low in the curve of your back, protected from knocks and out of the way in narrow passages. You can mount the corrugated inflator hose on the left or the right; the free port on the other side then serves as a dump or overpressure valve. The outer shell is made of tough Cordura 2000.
Harness and fit
The harness is a simple DIR harness with the D-rings you need and a crotch strap, without unnecessary extras. Shoulder straps and hip belt are separate and each adjusts on its own, both on the back and at the waist. That also lets you combine webbing of different thickness and dial the fit in precisely to your body. The beaver tail with its D-rings is removable. Because everything adjusts so easily, the Avenger also works well for teaching.
Do allow some time to set up your configuration: cylinder position, bungee attachment and trim take a few dives to fine tune. A sidemount course helps you get it right from the start.
Weight and trim
Four integrated weight pockets of 2.5 kg each sit under the bladder. They are placed slightly lower and further out on purpose, which streamlines your profile and better offsets the weight of your cylinder valves, so staying horizontal comes more easily. You also get two 2.5 kg trim pockets that attach to the left and right of the hip belt. If you need more lead, larger 4.5 kg trim pockets are available as an accessory. In total the Avenger carries up to 19 kg of lead.
Avenger, Avenger Professional or Side 16?
The Tecline Side 16 Avenger is the versatile middle model: the same 16 kg of lift as the Side 16, but with the adjustable harness, the protected rear dump and the streamlined weight pockets that pay off in training, cave and tec. The Tecline Side 16 Avenger Professional is the same Avenger with a Kevlar outer shell, for divers who often dive in rough environments and want extra abrasion resistance. The Tecline Side 16 is the recreational entry model, with a fixed butt plate and a Cordura 1000D outer shell.
Specifications
- Lift: 16 kg
- Harness: integrated DIR harness with crotch strap, shoulders and hip adjust separately
- Beaver tail: removable, with D-rings
- Weight: 4 integrated 2.5 kg pockets and 2 included 2.5 kg trim pockets
- Larger 4.5 kg trim pockets available as an accessory
- Maximum lead: 19 kg
- Inflator: mounts left or right
- Dump valve: low on the back in a protected position
- Material: Cordura 2000
Frequently asked questions
How much lead does the Avenger hold?
As standard you carry up to 15 kg: 10 kg in the four fixed pockets and 5 kg in the two included trim pockets. Swap those trim pockets for the larger 4.5 kg ones and you reach the 19 kg maximum. Most divers need less lead in sidemount than they expect, so always settle your amount with a proper weight check.
Is the Avenger a good first sidemount wing?
Yes. Because shoulders and hip adjust independently, the rig is easy to size, which makes it pleasant for new sidemount divers too. A course such as RAID Sidemount Fundamentals teaches you to set up your cylinders, bungees and trim properly from day one.
Can I use the Avenger for cave and technical diving?
Yes, that is what it was designed for. The low profile, the shielded dump valve and the cut away top help you in tight restrictions. Cave and decompression diving of course require the appropriate training.
Can I dive the Avenger in a drysuit?
Yes. In a drysuit you usually need more lead, and you can expand the trim pockets on the hip belt for that. How much lift you need depends on your cylinders, your undergarment and your lead. If you dive steel cylinders with a warm undersuit, it pays to work out your lift requirement in advance.
How do I look after my Avenger?
Rinse the wing with fresh water after every dive, including the inside through the inflator, and let it dry half inflated out of direct sunlight. Check the dump valves, the inflator and the harness webbing regularly.