The Ammonite T-VALVE is a drysuit inflation valve with a built-in power pass-through for heating. Air and power enter your suit through the same valve, so you can run a heated vest, heated gloves or a heated undersuit without an extra opening in your drysuit.
What does a thermo valve do?
A thermo valve takes the place of your drysuit's standard inflation valve. On the outside you connect your inflator hose and the cable from your heating battery; on the inside, power runs through an E/O cable to your heated garments. You keep inflating your suit just as you would with any other inflation valve.
Design and handling
The head swivels a full 360 degrees, so it does not matter whether your drysuit hose runs under your left or right arm. That is handy if you switch between sidemount and backmount. The valve has a low, domed profile that keeps the risk of snagging small.
The extra-large recessed push-button is easy to operate even with thick gloves or cold hands. A strong spring gives precise, progressive airflow and stops the flow as soon as you let go. On the inside, a smooth backplate with ammonite-shaped holes keeps the valve from pressing into your chest and stops cold air blasting through your undersuit.
Construction
The valve is made from nickel-plated brass and stainless steel. The coaxial E/O cable has a generous copper core with low resistance, so less power is lost between battery and garment. Every T-VALVE is designed and built by Ammonite System in Poland.
A360 or S360?
The T-VALVE comes in two versions, matched to the valve opening in your drysuit:
- A360: 38 mm stem, for drysuits fitted for Apeks-standard valves
- S360: 33 mm stem, for drysuits fitted for SI TECH-standard valves
Fitting and kit contents
You can fit and remove the T-VALVE without special tools; a steel mounting wrench is included. The kit contains:
- A360 or S360 T-VALVE
- Mounting and dismounting wrench
- Manual and certificate
Frequently asked questions
Do I need the A360 or the S360?
That depends on the valve hole in your drysuit. If your suit currently has an Apeks inflation valve, choose the A360; with a SI TECH valve, choose the S360. Not sure? Bring your suit by or send us a photo of your current valve.
Does the T-VALVE replace my current inflation valve?
Yes. It goes in place of your existing inflation valve and takes over that job completely, with the power pass-through for your heating added.
Will the T-VALVE work with my heating?
That depends on the connectors on your battery and heated garments. Let us check your current system before you order, so you know everything connects properly.
Can I fit the valve myself?
With the included wrench you can. Because your drysuit's watertightness depends on it, we advise having it fitted by a specialist if you have never done this before.