Kwark heated gloves

Kwark heated gloves in Polartec Windbloc, worn under your dry gloves: up to 20 W per hand on an external 12 V battery, with fuse and IP67 plugs. Sizes 7 to 10.
Manufacturer: Kwark
Delivery date: 1 - 2 weken
*
€287.00
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

The Kwark heated gloves are the solution for dry suit divers who make long dives in cold water, or who simply want more comfort. You wear them under your dry gloves, and powered by an external 12 V battery they keep your hands warm throughout the dive.

Material

The gloves are made of Polartec Windbloc. This material is very warm yet flexible, so you keep good use of your fingers. Even without power they stay warm.

Heating

Each glove has a maximum output of 20 W, spread over two independent circuits: one for the fingers and one for the back of the hand and wrist. The output is matched to the size, so the warmth per square centimetre is comparable in every size. The gloves have no built-in battery. You connect them to an external 12 V battery with power control, which needs enough capacity for your entire dive.

Safety

An easily replaceable fuse in the distribution block protects the gloves against short circuits. Thermal switches cut the power as soon as the temperature exceeds 45 degrees Celsius, as extra protection against the so-called slow-boiled frog effect, where you do not notice gradual overheating. The plugs are waterproof to IP67 when fully inserted. The gloves are CE certified.

When planning your dive, keep in mind that heating affects inert gas uptake and release. Plan your dives conservatively.

Connecting

A cable of about 35 to 38 cm comes out of the cuff of your dry suit and runs around your wrist to the glove. Avoid kinks and never pull on the cable. The gloves come with a transport bag and a power cable with a T-piece, which lets you connect the gloves and the Kwark heated vest to one battery at the same time.

Sizes and care

We stock the gloves in sizes 7, 8, 9, 9.5 and 10. You find your size by measuring the circumference of your hand around the knuckles.

Wash the gloves by hand only: protect the plugs first, put the gloves on and wash your hands as you normally would. Do not wring them out.

Frequently asked questions

Which battery do I need?

An external 12 V heating battery with power control, such as an Ammonite Accu thermo. Choose a capacity that comfortably covers your longest dive.

Can I combine them with the Kwark heated vest?

Yes. With the supplied T-piece cable you power the gloves and vest together from one battery.

How much power does one glove use?

Up to 20 W, depending on the size and the setting of your battery.

Which size should I choose?

Measure the circumference of your hand over the knuckles. If you are between two sizes, get in touch with us.

How do I wash the gloves?

By hand only and without wringing them out. Make sure the plugs are protected from water and soap.